Refine Your Search

Date

Date

Topic

Topic

Ferrous metals Metals Materials Extrusion AMS CACRC Commercial Aircraft Composite Repair Committee

Search Results

Viewing 21 to 40 of 89
<< First< Previous1234Next >Last >>
Sort by relevance
Standard

Carbon Fiber Fabric Repair Prepreg, 125 °C (250 °F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Resin and Film Adhesive
1999-12-01
HISTORICAL
AMS3970/2
AMS 3970/2 gives specific information about the qualification program for carbon fiber reinforced epoxy structural repair prepreg systems, applicable for 125 °C (250 °F) vacuum curing. The prepreg system may include an epoxy film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Carbon Fiber Fabric Repair Prepreg, 125°C (250°F) Vacuum Curing Part 1 - General Requirements
2023-08-14
WIP
AMS3970/1B
AMS 3970/1 gives information about the technical requirements and qualification procedure for carbon fiber fabric epoxy prepreg used for repair of carbon fiber reinforced epoxy structures. The prepreg system may include a film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Carbon Fiber Fabric Repair Prepreg, 125 °C (250 °F) Vacuum Curing Part 1 - General Requirements
1999-12-01
HISTORICAL
AMS3970/1
AMS 3970/1 gives information about the technical requirements and qualification procedure for carbon fiber fabric epoxy prepreg used for repair of carbon fiber reinforced epoxy structures. The prepreg system may include a film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements
2016-12-06
CURRENT
AMS3970/1A
AMS3970/1 gives information about the technical requirements and qualification procedure for carbon fiber fabric epoxy prepreg and a companion non-structural glass prepreg used for repair of carbon fiber reinforced epoxy structures. The prepreg system may include a film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Carbon Fiber Fabric Repair Prepreg, 125°C (250°F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Resin and Film Adhesive
2023-08-14
WIP
AMS3970/2B
AMS 3970/2 gives specific information about the qualification program for carbon fiber reinforced epoxy structural repair prepreg systems, applicable for 120 °C (250 °F) vacuum curing. The prepreg system may include an epoxy film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Carbon Prepreg, Film Adhesive and Non-Structural Glass Prepreg
2016-12-06
CURRENT
AMS3970/2A
AMS3970/2 gives specific information about the qualification program for carbon fiber reinforced epoxy structural repair prepreg systems, applicable for 120 °C (250 °F) vacuum curing. The prepreg system may include an epoxy film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Impregnation of Dry Fabric and Ply Lay-Up
2023-08-14
CURRENT
ARP5319
This SAE Aerospace Recommended Practice (ARP) describes and gives general guidelines on use and applicability of standard methods for impregnating dry fabric and lay-up of the impregnated plies. The methods of impregnating dry fabric and ply lay-up described in this document have specific application and are not interchangeable. The methods should only be used when specified in an approved repair procedure or with the agreement of the Original Equipment Manufacturer (OEM) or regulatory authority.
Standard

Vacuum Bagging of Thermosetting Composite and Metalbond Repairs
2023-08-14
CURRENT
ARP5143A
This Aerospace Recommended Practice (ARP) describes methods of vacuum bagging, a process used to apply pressure in adhesive bonding and heat curing of thermosetting composite materials and metalbond for commercial aircraft parts. If this document is used for the vacuum bagging of other than thermosetting composite materials and metalbond, the fitness for this purpose must be determined by the user. The methods shall only be used when specified in an approved Repair Document or with the agreement of the Original Equipment Manufacturer (OEM).
Standard

Composite Honeycomb NDI Reference Standards
2001-09-01
HISTORICAL
ARP5606
This recommended practice establishes generic reference standards that will accommodate nondestructive inspections (NDI) on a broad range of non-metallic composite honeycomb structures found on aircraft.
Standard

Composite Honeycomb NDI Reference Standards
2011-12-20
CURRENT
ARP5606A
This recommended practice establishes generic reference standards that will accommodate nondestructive inspections (NDI) on a broad range of non-metallic composite honeycomb structures found on aircraft.
Standard

Composite and Bonded Structure Engineers: Training Document
2023-04-24
WIP
AIR5278A
This document provides recommendations concerning the minimum knowledge and analytical skill guidelines for a composite and metal bond repair design engineer. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to design appropriate repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.
Standard

Composite and Bonded Structure Inspector: Training Document
2023-10-06
CURRENT
AIR5279A
This document provides recommendations concerning the minimum knowledge and skill guidelines for a composite and metal bond repair inspector. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to inspect repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.
Standard

Repair Tooling
2017-10-30
WIP
AIR5431A
This SAE Aerospace Information Report (AIR) offers information about the use of support tooling for composite repair processes, as well as descriptions of some of the different tooling materials used and their applications. If the repair document requires the use of tooling, refer to this AIR for additional information.
Standard

Machining of Composite Materials, Components and Structures
2015-04-15
CURRENT
AIR5367
This SAE Aerospace Information Report (AIR) provides information related to machining of composite materials, components and structures. This document is intended to supplement the machining processes and guidelines provided in OEM repair manuals and structural repair manuals. It is not intended to supersede the approved data provided in OEM repair documents.
<< First< Previous1234Next >Last >>
X